Optical Transceivers

400G, 800G and 1.6T optical transceivers for AI clusters and data centers
DriveNets-branded optics are standards-based, validated for DriveNets AI Fabric and backed by DriveNets support.
Download portfolio

Overview

DriveNets offers high-performance optical transceivers for AI clusters, data centers and service-provider networks, supporting connectivity from short-reach links to switch-to-router interconnects.

1G to 1.6T

Speeds to support a wide range of network requirements

24 models

For diverse
deployment
needs

50 m to 10 km

Reach across multimode and single-mode fiber

16 W max with LRO

vs. 26 W with a receive DSP for 1.6T modules

Portfolio Catalog

Optical interface, fiber and reach, lanes, power and product number for every module, with a datasheet per variant. Each datasheet includes key specifications, optical and electrical characteristics, pin assignment, mechanical outline and regulatory compliance.

Type Optical interface Fiber and reach Data rate Power Product number and datasheet
1G LX Duplex LC SMF, 10 km 1.25 / 1.0625 Gbps 1W max
10G LR Duplex LC SMF, 10 km 8.5 to 10.52 Gb/s 1W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
100G DR1 Duplex LC SMF, 500 m 1 × 106.25 Gbps PAM4 4.5W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
400G DR4 MPO-12, 8° APC SMF, 500 m 4 × 106.25 Gbps PAM4 9W max
400G VR4 MPO-12, 8° APC MMF, 50 m 4 × 106.25 Gbps PAM4 9W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
400G DR4 MPO-12, 8° APC SMF, 500 m 4 × 106.25 Gbps PAM4 9W max
400G VR4 MPO-12, 8° APC MMF, 50 m 4 × 106.25 Gbps PAM4 9W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
800G 2×DR4 Dual MPO-12, 8° APC SMF, 500 m 8 × 106.25 Gbps PAM4 16W max
800G 2×VR4 Dual MPO-12, multimode MMF, 50 m 8 × 106.25 Gbps PAM4 16W max
800G 2×FR4 Dual duplex LC SMF, 2 km 8 × 106.25 Gbps PAM4 16W max
800G DR4 MPO-12, 8° APC SMF, 500 m 4 × 212.5 Gbps PAM4 12W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
800G DR4 MPO-12, 8° APC SMF, 500 m 4 × 212.5 Gbps PAM4 16W max

Type Optical interface Fiber and reach Lanes Power Product number and datasheet
1.6T 2×DR4 Dual MPO-12, 8° APC SMF, 500 m 8 × 212.5 Gbps PAM4 26W max
1.6T 2×DR4 LRO Dual MPO-12, 8° APC SMF, 500 m 8 × 212.5 Gbps PAM4 16W max
1.6T 2×FR4 Dual duplex LC SMF, 2 km 8 × 212.5 Gbps PAM4 26W max
1.6T DR8 MPO-16, 8° APC SMF, 500 m 8 × 212.5 Gbps PAM4 26W max
1.6T DR8 LRO MPO-16, 8° APC SMF, 500 m 8 × 212.5 Gbps PAM4 16W max

DriveNets optical transceivers portfolio datasheet

Download

Questions and answers

What is the difference between 2×DR4, DR8 and 2×FR4 at 1.6T?

All three deliver 1.6 Tbps as 8 × 212.5 Gbps PAM4 lanes in an OSFP224 form factor, and differ in the fiber interface. 2×DR4 presents two independent 800G DR4 links on two MPO-12 connectors over single-mode fiber at up to 500 m. DR8 presents one link on a single MPO-16 connector, also 500 m over single-mode fiber, and is listed for 1600GBASE-DR8 Ethernet and IB XDR InfiniBand links. 2×FR4 multiplexes four CWDM wavelengths (1271, 1291, 1311 and 1331 nm) onto each of two duplex LC interfaces, for reaches up to 2 km over single-mode fiber.

What is LRO and when should I choose it?

Linear receive optics (LRO) modules replace the receive-side DSP with a PAM4 TIA that delivers a linear electrical output to the host (0.25 to 0.5 V VMA, host-requestable 300 to 700 mVpp). The host SerDes performs the equalization. The result is lower module power: 16 W maximum for the 1.6T 2×DR4 LRO and DR8 LRO versus 26 W maximum for the DSP-based 1.6T 2×DR4 and DR8. LRO modules follow IEEE P802.3dj D2.0 and the OIF 2024.522.02 LRO implementation agreement and require a host platform that supports linear receive optics; check the platform compatibility guide before ordering.

What is the difference between RHS, IHS closed-top and IHS open-top modules?

A riding heat sink (RHS) module has a flat top and is cooled by the heat sink mounted on the host cage. An integrated heat sink (IHS) module carries its own heat sink on the module, in a closed-top version and, for the 800G 2×FR4, also an open-top version. Choose the variant that matches the cage design of your switch or router. The optical specifications and the maximum power are the same within each RHS and IHS pair; the mechanical outline differs, so check the datasheet of the exact variant.

Which fibers and connectors do the modules use?

DR4, 2×DR4 and DR8 modules use single-mode fiber with MPO-12 or MPO-16 connectors with 8° APC endfaces and operate at 1304.5 to 1317.5 nm. 2×FR4 modules use single-mode fiber with two duplex LC interfaces and four CWDM wavelengths. VR4 and 2×VR4 modules use multimode fiber with MPO-12 connectors (single for 400G VR4, dual for 800G 2×VR4) and 850 nm VCSELs (840 to 870 nm) for reaches up to 50 m. The 1G LX, 10G LR and 100G DR1 modules use single-mode fiber with a duplex LC interface: LX and LR reach 10 km, DR1 500 m.

Are the modules hot-pluggable and how are they managed?

Yes. All modules are hot-pluggable and managed over a 2-wire serial interface. QSFP112, OSFP112 and OSFP224 modules use an OIF-CMIS memory map (CMIS 4.0 or later, 5.2 or 5.3 depending on the module); the 1G SFP LX and 10G SFP+ LR use SFF-8472 and the 100G QSFP28 DR1 uses SFF-8636. Digital diagnostics monitoring reports temperature (±3 °C), supply voltage (±0.1 V), Tx bias current (±10%) and Tx and Rx optical power (±3 dB).

What are the operating conditions?

Operating case temperature is 0 °C to +70 °C for all modules except the multimode modules (400G VR4 in QSFP112 and OSFP112, 800G 2×VR4), which are specified for +25 °C to +70 °C. Storage temperature is -40 °C to +85 °C. Relative humidity is 5% to 85% for the QSFP28, QSFP112, OSFP112 and OSFP224 modules, 5% to 95% for the 1G SFP LX and 0% to 95% for the 10G SFP+ LR. The supply voltage is 3.3 V (3.135 to 3.465 V).

Which standards do the modules comply with?

1G SFP LX: SFP MSA (INF-8074i), SFF-8472, IEEE 802.3z and FC-PI v2.0. 10G SFP+ LR: SFF-8431 Rev 3.0, SFF-8472 Rev 10.4, IEEE 802.3ae, 10GFC Rev 4.0, SFF-8432 Rev 5.0 and FC-PI-4 Rev 8.0. 100G QSFP28 DR1: IEEE Std 802.3cu-2022, QSFP28 MSA, CEI-28G-VSR and SFF-8636. 400G QSFP112: DR4 – IEEE 802.3df, IEEE P802.3ck D3.0, QSFP-112 MSA V2.0, OIF-CEI-112G-VSR-PAM4 and OIF-CMIS 5.2; VR4 – IEEE Std 802.3db-2022, IEEE Std 802.3ck-2022, QSFP-112 MSA Rev 2.1 and OIF-CMIS 4.0 or later. 400G OSFP112: DR4 – IEEE Std 802.3df, IEEE Std 802.3ck D3.0, OSFP MSA Rev 5.0 and OIF-CMIS Rev 5.2 or later; VR4 – IEEE 802.3db, IEEE P802.3ck D3.0, OSFP MSA Rev 5.0 and OIF-CMIS Rev 4.0 or later. 800G OSFP112 modules: IEEE Std 802.3df-2024 (2×DR4), IEEE Std 802.3db-2022 (2×VR4), IEEE Std 802.3cu (2×FR4) or IEEE P802.3dj D3.0 (DR4), with IEEE Std 802.3ck-2022 host electrical compliance, OSFP MSA Rev 5.0 or 5.2 and OIF-CMIS 5.2 or 5.3. 800G and 1.6T OSFP224 modules: IEEE P802.3dj D3.0 (LRO variants: D2.0 and OIF 2024.522.02), OSFP MSA Rev 5.2 and OIF-CMIS 5.2 or 5.3. All modules except the 10G SFP+ LR state Class 1 laser safety per IEC 60825-1 (the 10G SFP+ LR datasheet lists FDA, UL, TÜV and CE safety approvals), and all modules comply with the RoHS Directive 2011/65/EU.

How do I order or request a quote?

Contact DriveNets or your DriveNets partner. The data sheet and the datasheet of every module are available on this page.